Comments on: How To Fix "Please Insert a Disk into Drive" Error In Windows

By: uvraj

uvraj — Sat, 24 Oct 2009 05:20:38 +0000

in my last comment i want to ask that if there is external software of driver for this problem

By: uvraj

uvraj — Sat, 24 Oct 2009 05:16:21 +0000

sir i have 2gb flash drive iball whenever i insert the disk it gets detected but is not accessible and give the message insert disk into G i try to format it but i cant i have also tried from the disk management but i didnt suceeded so please help me out it there is other software or not

By: AgentSil

AgentSil — Sun, 18 Oct 2009 10:50:53 +0000

Well..seems like all those method doesnt work anymore.. maybe it is completely a hardware failure..
dont waste ur time to try all those method above..
just dump it and buy a new pendrive.. im just bought 8gb kingston pendrive and it was ended sumthg like this error..

im forced to buy a new one..:(

By: Sanjeev

Sanjeev — Fri, 16 Oct 2009 05:15:07 +0000

yesterday, I went to HP Service center and shown them the usb flash driver, they have checked it and provided me a new Pack.

By: Sanjeev

Sanjeev — Mon, 12 Oct 2009 11:41:13 +0000

Hi All, recently I’ve purchased HP 8GB v155w pendrive, from last one day I’m facing the same problem as mentioned by most of users.
I’ve workout something to diagnose this issue and feel due to some reason (either hardware or virus) it’s file system got currupted (something like MBR corrupt in HDD).
Whenever I inster my Flash Drive, XP show “USBest USB2FlashStorage USB Device” hardware found and installed successfully, but when my Flash Drive was working fine, it was showing “HP V155W USB Device” found. Same was showing if I’m going to Device manager and selecting Generic Device and checking the Properties. so it seems, it’s internal default file system got corrupted and Manufacturer can only do something as there no such utility I found to fix this issue.

By: Dave

Dave — Thu, 08 Oct 2009 18:48:52 +0000

My experience with fixing this, nothing worked until I tried changing the drive letter. This change took, but I still got an error. But I left the drive plugged in and after about half an hour, something must have timed out and presto, I got the popup asking me what I wanted to do with the drive (open files, play media, etc) that I always get on insertion.

Note, once you have the drive working, write something to it and do a proper disconnect, otherwise you may have to repeat this fix next time you plug it in.

Dave

By: saintgemer

saintgemer — Fri, 11 Sep 2009 06:46:22 +0000

guy try to used the formating option of your flash disk
on the computer management,

By: Harsha

Harsha — Mon, 07 Sep 2009 02:48:02 +0000

i have the same problem, i tried both the methods and its still not working

By: Derron

Derron — Wed, 12 Aug 2009 01:22:38 +0000

None of the solutions worked for me either. Changing the drive name didn’t do any good. (This only works if you had that drive letter is mapped; or used by some other drive already. I tryed it anyway and sure enough it does not work.) When I tryed to reformat, it thinks it’s a CD or DVD ROM Drive… and won’t format it because computer thinks there is no disk (CD or DVD) in drive. Still looking for ways to fix it… if it’s even possible. Please post solution if anyone finds a way!

By: sugat

sugat — Tue, 11 Aug 2009 16:51:24 +0000

i have try 2nd method but i didn’t get solution,
please help me !!